Partial Discharge Measuring Equipment
You need Acrobat ReaderJ to see PDF files.
If you don't have it, please download.
If you don't have it, please download.
DAC-PD series catalog
Digital Partial Discharge Analyzer
DAC-PD-9
By sampling data from fully throughout frequency ranges, various analyses and evaluations, such as Measurement of energy amount, 3D waves analysis, Time depending change monitoring, Historic record monitoring, and PD location (in accordance with IEC60034-27), etc, are possible.
Partial Discharge Measuring Equipment
DAC-PD-3
DAC-PD-3 has two modes of Wide Band and Low Frequency. You can use it for Partial Discharge tests of High-Voltage Equipment, Insulation Materials, High-Frequency Equipment, and Power Semiconductor devices.- High Voltage Equipment
(Generators, Rotating Machines, Armatures, Transformers, and Cables)
- Stator Coils
- Insulation Materials
- Power Semiconductor Devices
- High Frequency Equipment
DAC-PD-7
DAC-PD-7 is designed to reduce complicated tasks (calibration, wiring, and evaluation) with Partial Discharge (PD) measurements, so that can test PD promptly and easily without the expert knowledge.DAC-PD-7 alone allows all of the tests on PD without peripheral equipment.
DAC-PD-7 can easily realize the test of PD on print-circuit boards, connectors, semiconductors, small motors and other insulation materials, to make a judgment on good / bad of them.
DAC-PD-7P
Conform to EN60747-5-2：2002, DAC-PD-7P is a desirable partial discharge tester especially for Photo Couplers and Pulse Transformers etc.With built-in Power supply Max 5kV, operation can be done in very short tact time.
No corona variable frequency pressure test power supply
DAC-WT-25/50
DAC-WT-25/50 is a testing power supply for Withstand Voltage and Partial Discharge measurements, witch features corona-free and variable-frequency design.The partial discharge at a rated voltage is restrained less than 10pC, and the output frequency can be set from 46Hz to 1kHz (10kHz as optional design). The adoption of a linear amplifier enables the extremely small distortion of output waves, and the precision voltage can be applied to specimens.
Calibrator
DAC-CP-2
DAC-CP-2 is a calibrator for partial discharge measurements.The electric charge enables to generate up to max 10000pC.
It is battery-operated and can be charged by connecting to the measuring instrument (DAC-PD-3).
Calibrator Pulse Generator
DAC-CP-100
- Output Voltage: 10V, 30V, 100V- Risetime: 30ns, 1, 2, 5μs
- Generating Charge: 0 - 10000pC
- Repetitive Frequency: 50/60Hz (synchronized with Power Supply)
- Power Supply: AC100V 50/60Hz
- Dimension: W260*H149*D350 (mm)
- Weight: 5kg
High frequency CT
I-125-1A
- Outside Diameter (mm): 80φ x 35t- Inside Diameter (mm): 34φ
- Frequency Band: 10kHz - 100MHz
- Output Impedance: 50Ω
- Output Connector: N type (available for BNC converting plugs)
Partial Discharge Detecting Box
DAC-PDB-2
DAC-PDB-2 is an all-in-one unit consisting of Detector (DAC-PDE-2), the Blocking Coil, and the Coupling Capacitor.The rated voltage is AC12kV. It is the portable detecting unit because of small and light (7kg).
Blocking Coil & Coupling Capacitor
DAC-LCC-15/30/50
DAC-LCC-15/30/50 is all in one and weight saving by combining the high-inductance Blocking Coil with the Coupling Capacitor.You can select the followings correspond to using voltages.
- Model - Rated Voltage
DAC-LCC-15 AC15kV
DAC-LCC-30 AC30kV
DAC-LCC-50 AC50kV